Ask Our Community
Browse through forums, ask questions, and share knowledge
Mirror Polish Aluminum
A. Alloy: 6063, 6061, 6005
B. Temper: T5, T6
C. Length: Not longer than 6.5meter
D. Normal Anodizing thickness: >=10 micron
E. Normal powder coating thickness: 60-100 micron
F. Tensile strength: ≥ 16 mpa
G. Yield strength: ≥ 110 mpa
H. Extensibility: ≥ 8%
I. Hardness (HW): ≥ 8
To do mirror polishing surface of aluminum profile, it usually use chemical polishing, sometimes together with mechanical polishing.
Feature of Mirror Polish Aluminum
Chemical polishing is a chemical processing method that uses aluminum to selectively self-dissolve in an acidic or alkaline electrolyte solution to level and polish the surface to reduce its surface roughness and PH.
The polishing method has the advantages of simple equipment, no power supply, no limitation on the size of the profile. And it also has high polishing speed and low processing cost.
1). Our over 15 years aluminum industrial experience and strong team;
2). We have full completive environmental protection to make sure our production won’t damage the environment, and that will helpful for our future growth and development.
3). 28 million RMB registered capital and over 300 employees;
4). ISO9001: 2008, ISO14001: 2004, GMC certificate.
5). Complete production processing line, from casting, extruding, anodizing, powder coating and wood grain coating, also with deep processing and assembling capacity.
Each aluminum profile could be with protective plastic film, then a bundle profiles wrapped up by compound paper or heat shrink bag.
Payment=1000USD, 30% T/T in advance, balance before shipment.
25-30 days for first 40ft container
Q: If I wish to send an electronic drawing to you, what types of files can you accept?
A: We accept many file formats such as DXF, DWG and IGES. But DWG is the best one for us.Buffing Aluminium